Smooth-On Metalset® two-part epoxy adhesive has excellent adhesion properties, which makes it ideal for industrial bonding applications to apply on both porous and non-porous surfaces. It can be easily applied even on vertical surfaces without sagging or losing adhesion. This adhesive comes in two parts A and B. The mild odored part-A has a flash point greater than 300 degrees F, viscosity of 1000 to 2000 cP and a specific gravity of 1.07. The mild ammonia odored part-B has a flash point greater than 485 degrees F, viscosity of 320,000 cP and a specific gravity of 1.4. This adhesive is supplied in a 6-ounce tube and can be mixed in a 1:1 ratio by volume or weight to form a metallic color mixture.
Features:
- Adhesive with good machining qualities, offers excellent resistance to alkalis, dilute acids and solvents
- Contains aerodynamic smoothing compound
- Specific volume of 19.5 cubic inches per pound
- Tensile strength of 3600 psi and compressive strength of 7500 psi
- Tensile modulus of 165000 psi and compressive modulus of 160000 psi
- 1.2% elongation at break
- Sag resistance of 1/4 inch
Benefits:
- Ideal for stopping leaks in pipes/valves/tanks, bonding like/unlike surfaces, filling metal joints/dents and anchoring bolts in wood, concrete, or repairing metal surfaces
- Great for setting abrasion-resistant tile in conveyors and pulverizing equipment
- Serves as shim material between uneven surfaces
- Suitable for use as auto or truck body solder
- Use for making jigs and fixtures
Applications:
- Stopping leaks in pipes, valves and tanks (car gas tanks)
- Bonding like and unlike surfaces
- Filling metal joints
- Dents
- Anchoring bolts in wood
- Concrete and repairing metal surfaces
Specifications:
- Bell Spec 299-947-099 Rev. D Certified
- OSHA Hazard Certified