Henkel LoctiteCB.

Henkel Loctite. Hysol. EA 9309.3NA Epoxy Adhesive Kit, 1 qt - DG

Henkel Loctite® Hysol® EA 9309.3NA epoxy adhesive is a toughened and two-part adhesive, containing liquid part-A and gel part-B. Pink colored part-A component has epoxy like odor whereas blue...

Henkel LoctiteCB. 242 Threadlocker Sealant 24231 Blue, 50 mL bottle

Henkel Loctite 242 Series medium strength threadlocker sealant is suitable for use on fasteners up to 3/4 inch diameter. This sealant has a vapor pressure less than 5 millimeters Hg at 27 degrees C,...

Henkel LoctiteCB. 262 Threadlocker Adhesive 26231 Red, 50 mL bottle

Henkel Loctite 262 Series threadlocker adhesive has a vapor pressure less than 5 millimeters Hg at 27 degrees C, specific gravity of 1.05 at 25 degrees C and a boiling temperature rating of 300.2...

LOCTITE SEALANT-GASKET,#2-3OZ-85G TUBE

Gasket Sealant #2 - Reliable, paste-like gasket sealant/dressing/coating. Sets more slowly to a pliable film best suited for non-rigid, vibrating assemblies. Use to 4000F. Resistant to gasoline and...

LoctiteCB. 222 Threadlocker Sealant 21463 Purple, 10 mL bottle

Henkel Loctite® 222 Series low strength threadlocker sealant has a vapor pressure less than 5 millimeters Hg at 80.6 degrees F and VOC contents of 6.53 grams per liter. The mild odored, liquid...

LoctiteCB. 515 Flange Sealant 51531 Purple, 50 Ml tube

Henkel Loctite 515 Series anaerobic flange sealant is purple in color and withstands a temperature rating of -65 to 300 degrees F. The sharp odored gel flange sealant comes in a 50-milliliter tube...

LoctiteCB. ADHESIVE: THREADLOCKER,290,MED STRENGTH,50ML

Loctite 290 is a high strength, high temp, gasket eliminator and gap filler (0.25mm) It is a red paste. Meets AFS 1696 and BLI submarine approvals.

LoctiteCB. RETAINING,641,HIGH STRENGTH,50ML

Loctite® RETAINING,641,HIGH STRENGTH,50ML (21458)

LoctiteCB. SF 7471 Adhesive Primer 22477 Amber, Yellow, 4.5 oz aerosol Tin - DG

Henkel Loctite SF 7471 Series adhesive primer has a flash point of a flash point of -8 degrees C for safe use. This product has a vapor pressure of 172 millimeters Hg, specific gravity of 0.7953...

LoctiteCB.ADHESIVE,PRIMER: ,4.5OZ, 7649 - DG

Loctite 7649 MIL-SPEC decreases the set-up time of Loctite brand threadlockers and increases breakaway torque on most fastener surfaces. This anaerobic primer allows application of threadlockers in...